Welcome to your Exam 2 Standard
Which of the following hair texture needs a longer processing time to make certain there is complete saturation?
The amino acid required through the reduction of cystine is:
The size of the rod is responsible for ________ in permanent waving
Waving solution is also known as:
Tool position and _______ are established by the size of the base and the angle the hair is held at while wrapping
A sodium hydroxide relaxer is classified as:
The _______ perm wrap is good to use for men's styles because it gives a more natural appearing wave pattern
What is the purpose of a waving lotion?
The long and coiled polypeptide chains in hair are:
Which of the following is NOT true regarding base direction?
Alkaline waves contain _______ as a key ingredient
Perming and chemical relaxing directly affect the _______ by either breaking the bond or reforming it into a new shape
Perms are used to chemically reform hair by:
Which bond does permanent wave solution target?
In hair straightening procedures, ________ are used to soften the disulfide bond
The _______ perm wrap has offset base sections row by row to discourage obvious splits in the hair
Where there is thin hair growth ________ may cause too much strain and result in breakage during permanent waving service
The majority of alkaline permanent waves has a pH of:
Sodium hydroxide relaxer should not be applied to lightened hair or:
Tight wrapping can cause:
Spongy and limp hair or hair that tangles easily are all signs of:
Which service loosens curly hair into looser curls or waves?
When disulfide bonds are broken by hydroxide relaxers:
During a perm, the wave has reached its peak when it:
Which type of hair is a sodium hydroxide relaxer usually applied to?
In permanent waving, tools are called:
Never _______ the hair before performing chemical services
_________ is when the barber wraps hair at a () degree angle
Out of the following examples, which should a sodium hydroxide relaxer service not be performed on/
_________ rods have a smaller circumference
Where is the weakest section of the hair strand in overly curl hair?
Which of the following is true regarding a hydrogen bond?
The fundamental components of acid waves are:
Which of the following should be considered during the hair analysis that precedes a chemical service?
What is the main ingredient in a rearranger?
Which of the following create small, firm curls?
_______ is the rearrangement of the basic structure of overly curly hair into a straighter hair form
A soft perm, also known as a reformation curl, loosens the texture of overly curly hair by using:
What is the hair's ability to absorb and retain liquids?
A client with porous or damaged hair is not a good candidate for a/an ________ wave
The key ingredient in most neutralizers is either:
Do not proceed with a chemical texturing service if:
Which of the following is true of salt bonds?
Which permanent wave rod creates a uniform curl for the total width of the strand?
Generally, you should not _________ before applying hydroxide relaxer
Which of the following are processed without heat?
What are the two basic methods of wrapping hair around a tool?
Which of the following is true regarding a galvanic machine?
The position of motor points:
Which of the following would help a hydrating serum penetrate dry skin?
Almost every muscle and nerve has a:
What are the four basic skin types?
The scientific rest facial is also known as:
The massage movement where the skin is grasped between the thumb and finger is:
Which of the following is NOT a beneficial effect of massage?
Which of the following is NOT true regarding paraffin wax mask?
_________ can be used to perform vibratory facials in the barber shop, but it is generally used for massage over heavy muscle tissue such as the scalp and shoulders
The massage technique known as vibration involves:
What is a slight or heavy kneading, squeezing and rolling or pinching of muscles?
Tapotement is also known as:
The client benefits from the following during a facial mask:
Which of the following can hydrate and balance the oil/water moisture content of the skin?
How do male and female skin-care programs compare to one another?
Which of the following is a benefit of a clay mask?
________ uses a mushroom or rake-shaped electrode during Tesla high frequency application and has a germicidal and calming effect on the skin
________ reduces fat cell in the subcutaneous tissue which assists in firming the client's skin
When pressure or stimulation causes a contraction at a point on the skin over a muscle, you have located a/an:
Men can use skin toner just as they would use:
Massage movements are rendered:
A direct and stead current having a positive and negative pole utilized during a facial is:
Out of the following, which calms the skin and also tones down redness?
Skin toners, fresheners and astringents that are used after cleansing and before the application of a moisturizer are known as:
Which of the following facial treatments is galvanic current used for?
_________ is a form of massage frequently used on the forehead, face and scalp - involving a circular, light skimming style of stroking made with the palm of the hand or with the fingers for small surfaces
Which type of the following facial treatment machines supplies galvanic current?
When abrasions are present:
The action of introducing solutions into body tissues through the use galvanic current is:
A benefit of facial massage includes:
Massage should always be rendered in moderation and should never last excessively long or be:
Tapotements mainly influence:
A ___________ has a powerful vacuum that sprays high grade crystals on the surface of the client's skin with a pressurized wand
Nonsetting mask remain moist and:
What is the infusion of a negative product with an alkaline pH into the skin?
Which of the following should a quality skin cleanser do?
What should you do to ensure proper electrical connections during iontophoresis?
The device that helps to warm the skin, soften the pores, induces the flow of sebum and sweat and has an antiseptic effect on problematic skin by use of moist, uniform steam is:
_________ uses the massage technique of slapping and hacking
At what point should the steamer's vaporizer switch be turned on?
Before performing extractions:
Massage reduces fat cells in the subcutaneous tissue which:
Massage the uses circular movements on the scalp, face and neck in order to stimulate the circulation and glandular activity of the skin is known as:
What is the infusion of a positive product such as astringent solution into the skin?
Toning the weakened muscles of facial expression can be achieved the best using:
What are the fibrous tissues which can stretch and contract to produce all body movements?
What occurs when coiled hair is allowed to develop in its natural condition without the use of combs, chemicals or heat?
When curved lines are created to soften and blend vertical lines or horizontal lines in a hairstyle they are:
If a face is shaped like a trapezoid, it is _________ shaped
_________ lines are slanted and will produce sloped lines at the perimeter
Cutting shorter lengths within the form in order to reduce bulk (creating support and mobility) is called:
Roller sets, pincurls and fingerwaves are all types of:
Most men's hairstyles require _________ so that the hair conforms to the shape of the head; is shorter at the nape and longer at the top
A three-strand underbraid is known as:
_________ lines are perpendicular to the floor and construct an appearance of equilibrium and remove weight
To create precise lines on straight hair use:
A movable guide that includes a portion of previously cut hair is a/an ______ design line
The amount of pressure applied when combing and holding a section of hair to be cut is known as:
What would a projection angle of 45 degrees be considered?
For thinning difficult areas of the hair such as whorls, use the _________ technique to help difficult area blend in with the surrounding hair or hairline
Which of the following is NOT a term associated with razor cutting?
The ________ technique outline's the haircut ands is a part of the finish work of most men's haircuts
A client's ________ profile may be due to a protruding nose or a sloping chin or forehead
When __________ to remove bulk, an up-and-down sliding motion is used with the shears along the parting combined with a slight closing of the shears each time they are moved in the direction of the scalp
A profile that has a minor curvature from the front hairline to the tip of the nose and from the tip of the nose to the chin is:
Which is true regarding thinning?
__________ is the highest point on the top of the client's head
The angle at which hair is held in relation to the curve of the head before cutting is known as projection and is also known as:
Cutting interior sections of the hair can produce:
What are lines which subdivide shapes or sections to assist in distributing and controlling the hair?
Arrange hair close to the forehead with a/an ________ profile to minimize the appearance of the large forehead
When a cut is made for the purpose of subsequent partings or sections of hair to be measured and cut it is:
To minimize a prominent nose:
To intentionally guide hair through the natural process of locking by means of twisting, braiding, combing, wrapping, palm or finger rolling creates:
Hair is held straight out from the curve of the client's head when employing a ________ elevation while cutting
When the razor is held almost flat against the surface of the hair, it is:
The foundation of the curl where the barrel is placed is the:
A 0 degree cut is known as a _________ form
Which of the following blow-drying techniques builds fullness while letting the hair fall into the natural lines of the cut?
_________ is an outline or silhouette
What is texturizing capable of?
Using the fingers, comb and setting lotion to form S-shaped patterns creates:
A line which divides the hair at the scalp and separates one section of the hair from another section is:
The graduated or stacked effect is achieved with:
What is the region that surrounds the form?
What type of guide is used for designs which appear as one-length at the perimeter?
Which of the following is the outer perimeter line of a haircut?
Lines that travel an equal distance from each other from multiple points are:
Which of the following is NOT a clipper cut style?
What is the most commonly used projection in men's haircutting?
Which of the following is a thin continuous mark that is incorporated throughout a haircut?
A long neck can be minimized by:
Which of the following cutting positions is frequently used for cutting solid forms?
With a 0-elevation or 45-degree cut, the heaviest perimeter area is:
A bonded weft should not be removed until the weft becomes loose after messaging in oil (or a bonding remover) to the bonded area:
A non-lace front hair replacement system such as a toupee is applied with:
Which of the following is NOT an advantage of synthetic hair solutions
Before fitting a hair solution for a client, a ________ should be completed to determine if the client has the option of purchasing a stock product
Synthetic hair solutions should be cleansed with:
Which of the following is NOT good advice for hair solutions maintenance?
Which of the following is true regarding bonding a weft?
Which of the following are intended to cover the entire head and are worn for specific purposes?
Which of the following is needed to customize a stock hair replacement system?
Currently, the most popular hair extension and wig choice is made of:
Which of the following is NOT part of the preparation procedure of making a hair solutions template?
For a full head bonding service it is important to:
________ involves extending someone's natural hair by attaching hair fibers to create length and volume
A parting or a cornrow that establishes the placement pattern of wefts or strand additions is a:
Placing four fingers above the eyebrow while using the center of the nose as a guide helps to:
To attach wefted hair to the natural hair with a latex or surgical type adhesive is known as:
______ is when the hair strands in a hair solution have been sorted so that the cuticle points toward the hair ends in the natural direction of growth
Which of the following is NOT a type of animal hair commonly used in mixed hair solutions & wigs?
When bonding a weft to the client's natural hair:
Human hair wigs usually ________ as a normal human head of hair
When ignited by a match, synthetic hair will burn rapidly and will not produce an odor, or it will:
Perform a patch test before:
In the feed-in method, the amount of extension material should be _______ as/than the size of the base
Which of the following is NOT a knotting method in wig making?
When ignited by a match, human hair will produce an odor and will also:
Hair solution plaster mold forms are desirable because:
The simplest method to measure for a stock hair solution to be ordered from a manufacturer is:
Secure a weft to a cornrow track by:
Which of the following is NOT true?
Facial hair solutions such as sideburns, mustaches and beards are attached:
Aniline derivatives can be used only on hair solutions that are made of:
A ________ is a type of hair addition which covers the top of the head
Which of the following is NOT a supply needed for making a template for a custom hair solution?
Because most of the ________ is removed during the processing of human hair to create a wig, harsh solvents should not be used to clean the wig
Never bond a hair replacement system too far back on the client's scalp or:
When applying extension material to cornrows for a client who has a thinning hairline:
Hair additions are suitable option for clients who want to add:
Lightweight stretch cap wigs should fit tight enough to not slip, lift or shift and must also:
Why is it important to send a hair solutions manufacturer a sample of the client's hair?
Using hair extensions or additions:
It is easy to see when a person is wearing extensions with braids if:
Synthetic hair is difficult to match and blend with the _______ of human hair
The feed-in method of adding extension material to cornrows:
Permanent wave rods need to be ________ on hair systems to eliminate weight and rod marks
The manner in which the hair is attached to the base of a hair solution such as a wig is referred to as:
When the hair in a replacement system has been root-turned:
Which of the following is commercial hair sewn on a fine base and used for hair weaving?
Which of the following is NOT an advantage of a human hair wig or extension material?
When a barber provides a template or pattern and a color matching sample to a hair solutions supplier, a _________ hair solution may be created for a client
Once a hair replacement system has been applied and blended with the client's natural hair, the client must:
What is the objective of shaving?
What is the first step a barber should take for a head shaving procedure?
Which of the following is NOT a purpose for a towel wrap around the barber's hand during a shaving procedure?
When a barber approaches facial hair design artistically, the _______ is/are most important as well a s correlating balance of facial hair with the proportions of the face, head and body
Design and shaping of the beard correctly should NOT
The correct angle of cutting with a straight razor is:
Excessively close shaving along with excessive pressure can damage skin to the point that:
Which of the following is NOT appropriate to use for a head shave?
Which of the following is NOT a part of proper procedure while shaving?
Choose the appropriate procedure to administer when small cuts or nicks result from a shave
The rubbing time _______ when lathering for a shave
Which of the following can be used to perform beard design and trimming?
To test the temperature of a steamed towel:
Straight razors, hones and strops should be disinfected:
During a/an _______, the hair will be shaved at the sideburn area, behind the ear areas, and sometimes the front hairline
Once you open your razor, it should be held between the thumb and index finger _________ and rest across the second and third fingers, using your little finger to brace the razor
Which of the following is NOT correct when stretching the skin during the shaving procedure
The wearing of a beard helps facial features appear:
Which of the following is a reason a customer may not be satisfied with the shave procedure
The once-over-shave should leave a smooth face without:
What are the four razor positions and strokes utilized in barbering?
A/An _________ shave usually follows a haircut
Balling-the-chin during shaving is:
Which of the following is NOT a reason for lathering?
Which of the following positions and strokes is NOT used when shaving the face?
A barber should always _________ before providing a shaving service
If a client has pustules or a skin infection:
The fingers of the barber's non-dominant hand need to be kept _________ at all times during a shave
Which of the following is NOT a correct way to position and stroke the razor over the skin's surface?
Which of the following is a good way to remove bulk from a mustache?
Pay attention to _______ under the chin to help determine design options for outlines of a beard design
Replaceable injector blades should be disinfected before use and then:
__________ is not desirable because it can cause skin irritation
The razor position and stroke that is used to make the left sideburn outline and for shaving the left side behind the ear during a neck shave is the:
A client with ________ will need more care during lathering, and more steam towels will be required to prepare him for the shave
Use hot towels to prepare facial hair for the shave unless:
After consulting with the client regarding shape preferences, trim a mustache to the desired length with:
Shaving strokes should be _______ into the lathered surface
When shaving the upper lip, strokes should be performed to follow the curves of the face:
What is the reason for steaming the face in preparation of the skin for shaving?
What is the alum powder called which is used to stop the bleeding of nicks and cuts?
________ beard trims are best on clients whose beards have an even density and texture
_________ with a straight razor can cause injury to the skin
__________ movements are used with the cushion tips of the fingers to rub lather briskly and evenly over the bearded areas of the face and neck to be shaved
After properly folding the steam towel:
________ is the actual movement of the razor while it is behind held in one of the four positions
What is a standard finishing service to a facial shave?
A/An ________ shave involves shaving the neckline on both sides of the neck as well as behind ears and across the nape if necessary or desired
When a colorist adds red to a blue-based color it will appear:
__________ can be protein and non-protein; correct excessive porosity; penetrate the cuticle and fill in small holes in the hair
Which of the following choices are incompatible with an oxidative hair coloring?
